{"sheets":[{"name":"Traceability","hidden":false,"max_col":"O","rows":{"1":{"A":"Lab ID","B":"Masters","G":"Traceability","N":"Accuracy","O":"Uncertainty"},"2":{"A":"CEQ023","B":"M-10 Steel Slip Gauge Set, Make : Aditya, Sr. No. : 3188, Size : 2.5 to 25 mm, Grade : 0","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/095, Cal Date : 03\/01\/2024, Valid up to 02\/01\/2026"},"3":{"A":"CEQ024","B":"M-88 Steel Slip Gauge Set, Make : Aditya, Sr. No. : 3187, Size : 0.5 to 100 mm, Grade : 0","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/096, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"4":{"A":"CEQ025","B":"Caliper Checker, Make : Aditya, Sr. No. : 1019, Size : 20 to 600 mm","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/101, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"5":{"A":"CEQ026","B":"Dial Calibration tester, Make : Micron, Sr. No. 13 02 18, Range : 0 to 25 mm. Resolution : 0.0002 mm","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/097, Cal Date : 03\/01\/2024, Valid up to 02\/01\/2026"},"6":{"A":"CEQ031","B":"Electronic Probe with DRO, Make : Baker, Sr. No. CAA407 & D2087, Range : 0 to 0.2 mm, Resolution : 0.0001 mm","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/102, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"7":{"A":"CEQ034","B":"Steel Comparator Stand, Make : Micron, Sr. No. : 290218, Size : 60 mm dia","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/098, Cal Date : 03\/01\/2024, Valid up to 02\/01\/2026"},"8":{"A":"CEQ037","B":"Steel Length bars (11 Nos), Make : Mikronix, Sr. No. : 4902, Size : 25 to 50 mm","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/100, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"9":{"A":"CEQ038","B":"Steel Length bars (12 Nos), Make : Mikronix, Sr. No. : 4903, Size : 25 to 300 mm","G":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/099, Cal Date : 03\/01\/2024, Valid up to 02\/01\/2026"}}},{"name":"OBS-COP-001-01 ","hidden":false,"max_col":"AD","rows":{"1":{"E":"Testing Electrical Standards Laboratory and R&D Institute Pvt. Ltd."},"2":{"E":"Observation Sheet for Caliper (Electronic\/Dial\/Vernier)"},"3":{"E":"Issue No","I":"01","M":"Issue Date","Q":"01-01-2020"},"4":{"E":"Amend No","I":"00","M":"Amend Date","Q":"-"},"6":{"A":"COP No","C":"Year","F":"Location","I":"SRF No","L":"Job No","O":"Calibration Date","R":"Certificate No"},"7":{"A":"COP\/001-01","C":"2025","F":"0","I":"LM250830\/1","L":"LM250830\/1 \/ TC \/ MT \/ 002","O":"30\/08\/2025","R":"LM250830\/1 \/ TC \/ MT \/ 002"},"8":{"A":"Basic Details of Device Under Calibration (DUC)"},"9":{"A":"Nomenclature of DUC","E":"Vernier Caliper"},"10":{"A":"Range","E":"0","F":"to","G":"300","I":"mm","K":"Identification No","O":"2"},"11":{"A":"Resolution","E":"0.01","G":"mm","K":"Serial No","O":"2"},"12":{"A":"Make","E":"34","K":"Model No","O":"88"},"13":{"A":"Specific Instruction if any"},"14":{"A":"Environmental Condition"},"15":{"A":"Parameter","E":"Starting of Cal.","H":"Ending of Cal.","K":"Parameter","O":"Starting of Cal.","R":"Ending of Cal."},"16":{"A":"Temperature in °C","K":"Relative Humidity in %Rh"},"17":{"A":"Master to be used"},"18":{"A":"Sr. No","B":"Description of master","H":"Identification No & Serial No","N":"Range \/ Resolution","T":"Tick"},"19":{"A":"1","B":"Caliper Checker","H":"CEQ025 & 1019","N":"600 mm"},"20":{"A":"2","B":"Steel Length bars - 12 Nos","H":"CEQ038 & 4903","N":"25 to 300 mm \/ Grade - 1"},"21":{"A":"3","B":"Steel Length bars - 11 Nos","H":"CEQ037 & 4902","N":"25 to 50 mm \/ Grade - 1"},"22":{"A":"4","B":"M 88 Steel Slip Gauge Set","H":"CEQ024 & 3187","N":"0.5 to 100 mm \/ Grade 0"},"23":{"A":"5","B":"Digital External Micrometer","H":"CEQ032 & 66297856","N":"0 to 25 mm \/ 0.001 mm"},"24":{"A":"6","B":"Granite Surface Plate","H":"CEQ036 & -","N":"600 x 600 mm \/ Grade 0","X":"300"},"25":{"A":"7","X":"8"},"26":{"A":"Calibration Result"},"27":{"A":"1","B":"Error determine in External Measurement","H":"(All Value in mm)","W":"External"},"28":{"A":"Sr. No.","B":"Size\/Reading of Master","F":"Reading on DUC","W":"0","X":"100","Y":"150","Z":"180","AA":"200","AB":"250","AC":"280","AD":"300"},"29":{"F":"1st Reading","K":"2nd reading","P":"3rd reading","W":"1","X":"2","Y":"3","Z":"4","AA":"5","AB":"6","AC":"7","AD":"8"},"30":{"A":"1","B":"0","F":"0","K":"0","P":"0","U":"0","W":"1","X":"0","Y":"0","Z":"0","AA":"0","AB":"0","AC":"0","AD":"0"},"31":{"A":"2","B":"20","F":"20","K":"20","P":"20","U":"20","W":"2","X":"10","Y":"10","Z":"10","AA":"10","AB":"20","AC":"20","AD":"20"},"32":{"A":"3","B":"50","F":"50","K":"50","P":"50","U":"50","W":"3","X":"20","Y":"20","Z":"20","AA":"20","AB":"50","AC":"50","AD":"50"},"33":{"A":"4","B":"100","F":"100","K":"100","P":"100","U":"100","W":"4","X":"50","Y":"50","Z":"50","AA":"50","AB":"100","AC":"100","AD":"100"},"34":{"A":"5","B":"150","F":"150","K":"150","P":"150","U":"150","W":"5","X":"100","Y":"100","Z":"100","AA":"100","AB":"150","AC":"150","AD":"150"},"35":{"A":"6","B":"200","F":"200","K":"200","P":"200","U":"200","W":"6","X":"n","Y":"150","Z":"150","AA":"150","AB":"200","AC":"200","AD":"200"},"36":{"A":"7","B":"250","F":"250","K":"250","P":"250","U":"250","W":"7","X":"n","Y":"n","Z":"180","AA":"200","AB":"250","AC":"250","AD":"250"},"37":{"A":"8","B":"300","F":"300","K":"300","P":"300","U":"300","W":"8","X":"n","Y":"n","Z":"n","AA":"n","AB":"n","AC":"280","AD":"300"},"38":{"A":"9","W":"9"},"39":{"A":"10","W":"10"},"40":{"A":"2","B":"Error determine in Internal Measurement","H":"(All Value in mm)"},"41":{"A":"Sr. No.","B":"Size\/Reading of Master","F":"Reading on DUC"},"42":{"F":"1st Reading","K":"2nd reading","P":"3rd reading","W":"Internal"},"43":{"A":"1","B":"20","F":"20","K":"20","P":"20","U":"20","W":"0","X":"100","Y":"150","Z":"180","AA":"200","AB":"250","AC":"280","AD":"300"},"44":{"A":"2","B":"50","F":"50","K":"50","P":"50","U":"50","W":"1","X":"2","Y":"3","Z":"4","AA":"5","AB":"6","AC":"7","AD":"8"},"45":{"A":"3","B":"100","F":"100","K":"100","P":"100","U":"100","W":"1","X":"20","Y":"20","Z":"20","AA":"20","AB":"20","AC":"20","AD":"20"},"46":{"A":"4","B":"150","F":"150","K":"150","P":"150","U":"150","W":"2","X":"50","Y":"50","Z":"50","AA":"50","AB":"50","AC":"50","AD":"50"},"47":{"A":"5","B":"200","F":"200","K":"200","P":"200","U":"200","W":"3","X":"100","Y":"100","Z":"100","AA":"100","AB":"100","AC":"100","AD":"100"},"48":{"A":"6","B":"250","F":"250","K":"250","P":"250","U":"250","W":"4","X":"-","Y":"150","Z":"150","AA":"150","AB":"150","AC":"150","AD":"150"},"49":{"A":"7","B":"300","F":"300","K":"300","P":"300","U":"300","W":"5","X":"-","Y":"-","Z":"-","AA":"200","AB":"200","AC":"200","AD":"200"},"50":{"A":"8","W":"6","X":"n","Y":"-","Z":"-","AA":"-","AB":"250","AC":"250","AD":"250"},"51":{"A":"9","W":"7","X":"n","Y":"n","Z":"-","AA":"-","AB":"-","AC":"-","AD":"300"},"52":{"A":"10","B":"-","W":"8","X":"-","Y":"-","Z":"-","AA":"-","AB":"-","AC":"-","AD":"-"},"53":{"A":"3","B":"Error determine in Depth Measurement","H":"(All Value in mm)"},"54":{"A":"Sr. No.","B":"Size\/Reading of Master","F":"Reading on DUC","W":"Depth"},"55":{"F":"1st Reading","K":"2nd reading","P":"3rd reading","W":"0","X":"100","Y":"150","Z":"180","AA":"200","AB":"250","AC":"280","AD":"300"},"56":{"A":"1","B":"0","F":"0","K":"0","P":"0","U":"0","W":"1","X":"2","Y":"3","Z":"4","AA":"5","AB":"6","AC":"7","AD":"8"},"57":{"A":"2","B":"25","F":"25","K":"25","P":"25","U":"25","W":"1","X":"0","Y":"0","Z":"0","AA":"0","AB":"0","AC":"0","AD":"0"},"58":{"A":"3","B":"50","F":"50","K":"50","P":"50","U":"50","W":"2","X":"25","Y":"25","Z":"25","AA":"25","AB":"25","AC":"25","AD":"25"},"59":{"A":"4","B":"100","F":"100","K":"100","P":"100","U":"100","W":"3","X":"50","Y":"50","Z":"50","AA":"50","AB":"50","AC":"50","AD":"50"},"60":{"A":"5","B":"150","F":"150","K":"150","P":"150","U":"150","W":"4","X":"100","Y":"100","Z":"100","AA":"100","AB":"100","AC":"100","AD":"100"},"61":{"A":"6","B":"200","F":"200","K":"200","P":"200","U":"200","W":"5","X":"-","Y":"150","Z":"150","AA":"150","AB":"150","AC":"150","AD":"150"},"62":{"A":"7","B":"250","F":"250","K":"250","P":"250","U":"250","W":"6","X":"n","Y":"-","Z":"-","AA":"200","AB":"200","AC":"200","AD":"200"},"63":{"A":"8","B":"300","F":"300","K":"300","P":"300","U":"300","W":"7","X":"n","Y":"n","Z":"-","AA":"-","AB":"250","AC":"250","AD":"250"},"64":{"A":"9","W":"8","X":"n","Y":"n","Z":"n","AA":"n","AB":"n","AC":"-","AD":"300"},"65":{"A":"10","W":"9"},"66":{"A":"4","B":"Parallelism Error","E":"(All Value in mm)","W":"10"},"67":{"A":"Parameter","H":"Parallelism","K":"Parameter","R":"Parallelism"},"68":{"A":"Parallelism of External Measuring jaws","H":"0.012","K":"Parallelism of Internal Measuring Jaws","R":"0.011"},"69":{"A":"5","B":"Readings for Repeatability error and Type A Uncertainty","I":"(All value in mm)"},"70":{"A":"Readings taken at","P":"Average","S":"Standard Deviation"},"71":{"A":"150","D":"150","G":"150","J":"150","M":"150","P":"150.001"},"72":{"A":"150","D":"150","G":"150","J":"150","M":"150.01","S":"0.0031622777"},"73":{"A":"Remarks if any"},"77":{"A":"Name and Designation of Calibration person","N":"Signature"},"79":{"A":"Calibrated by","D":"Vinod Kotadiya"},"80":{"A":"Designation","D":"Technical Engineer \/ Technical Manager"}}},{"name":"Certificate","hidden":false,"max_col":"N","rows":{"2":{"A":"Certificate No","D":"LM250830\/1 \/ TC \/ MT \/ 002","G":"Unique Lab Report (ULR) ID","J":"CC234525000000154F","N":"TRDI30\/08\/2025464212LM250830\/1 \/ TC \/ MT \/ 002"},"3":{"A":"Date of Calibration","D":"30\/08\/2025","G":"Recommended Next Due Date*","J":"46421"},"4":{"A":"Receipt \/ WRF No.","D":"LM250830\/1","G":"Date of DUC Received","J":"30\/08\/2025"},"5":{"A":"Certificate Issue Date","D":"30\/08\/2025","G":"Calibration performed at","J":"Lab"},"6":{"A":"Details of Customer"},"7":{"A":"Name","D":"AccuTest Calibration"},"8":{"A":"Address","D":"12 Calibration Road, Tech Park, Surat, Gujarat, India, 390011"},"9":{"A":"Ref. Doc. No.","D":"LTB-300825\/001"},"10":{"A":"Date of Doc.","D":"30\/08\/2025"},"11":{"A":"Details of Device under Calibration (DUC)"},"12":{"A":"Nomenclature","C":"Vernier Caliper"},"13":{"A":"Calibration Range","C":"0 to 300 mm","G":"Mfg. Serial No","I":"2"},"14":{"A":"Resolution","C":"0.01 mm","G":"Identification No","I":"2"},"15":{"A":"Make \/ Model","C":"34 \/ 88","G":"Condition of DUC","I":"Good"},"16":{"A":"Location","G":"Specified Accuracy","M":"E"},"17":{"A":"Details of Calibration Masters and Traceability"},"18":{"A":"Lab ID","B":"Description of Master","F":"Traceability"},"19":{"A":"CEQ025","B":"Caliper Checker, Make : Aditya, Sr. No. : 1019, Size : 20 to 600 mm","F":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/101, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"20":{"A":"CEQ024","B":"M-88 Steel Slip Gauge Set, Make : Aditya, Sr. No. : 3187, Size : 0.5 to 100 mm, Grade : 0","F":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/096, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"21":{"A":"CEQ037","B":"Steel Length bars (11 Nos), Make : Mikronix, Sr. No. : 4902, Size : 25 to 50 mm","F":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/100, Cal Date : 04\/01\/2024, Valid up to 03\/01\/2026"},"22":{"A":"CEQ038","B":"Steel Length bars (12 Nos), Make : Mikronix, Sr. No. : 4903, Size : 25 to 300 mm","F":"Traceable to National Standard through NABL Lab Certif. No CC-2188, Pune, Certificate No. 2024\/01\/099, Cal Date : 03\/01\/2024, Valid up to 02\/01\/2026"},"23":{"A":"Details of Calibration Procedure and Reference Documents"},"24":{"A":"Lab Procedure","E":"Method of Calibration"},"25":{"A":"Lab Procedure No. : COP\/001-01","E":"The calibration of DUC was carried out by using Precision Caliper Checker, Slip Gauge and Length bars for External, Internal & Depth measurement"},"27":{"A":"Calibration Method is generally based on","E":"NABL 129 - 2019, IS 16491 (Part 1) - 2016"},"28":{"A":"Details of Environment Condition at the Time of Calibration"},"29":{"A":"Temperature (20°C ± 2°C)","E":"#DIV\/0!","F":"°C","G":"Relative Humidity (50 ± 15% Rh)","K":"#DIV\/0!","L":"% Rh"},"30":{"A":"Uncertainty of Measurement","F":"± 10.0 µm"},"31":{"A":"The reported expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2 such that the coverage probability corresponds to 95.45% confidence level"},"35":{"A":"DISCIPLINE : MECHANICAL CALIBRATION"},"36":{"A":"GROUP : DIMENSION (BASIC MEASURING INSTRUMENT,GAUGE ETC.)"},"38":{"A":"Calibration Result"},"40":{"A":"1.0","B":"Calibration Result of DUC \/ Error of Measurement (All value in mm)"},"41":{"B":"Sr. No.","C":"External Measurement","F":"Internal Measurement","I":"Depth Measurement"},"42":{"C":"Standard Size","D":"Observed on DUC","E":"Error","F":"Standard Size","G":"Observed on DUC","H":"Error","I":"Standard Size","J":"Observed on DUC","K":"Error"},"43":{"B":"1","C":"0","D":"0","E":"0","F":"20","G":"20","H":"0","I":"0","J":"0","K":"0"},"44":{"B":"2","C":"20","D":"20","E":"0","F":"50","G":"50","H":"0","I":"25","J":"25","K":"0"},"45":{"B":"3","C":"50","D":"50","E":"0","F":"100","G":"100","H":"0","I":"50","J":"50","K":"0"},"46":{"B":"4","C":"100","D":"100","E":"0","F":"150","G":"150","H":"0","I":"100","J":"100","K":"0"},"47":{"B":"5","C":"150","D":"150","E":"0","F":"200","G":"200","H":"0","I":"150","J":"150","K":"0"},"48":{"B":"6","C":"200","D":"200","E":"0","F":"250","G":"250","H":"0","I":"200","J":"200","K":"0"},"49":{"B":"7","C":"250","D":"250","E":"0","F":"300","G":"300","H":"0","I":"250","J":"250","K":"0"},"50":{"B":"8","C":"300","D":"300","E":"0","F":"-","G":"-","H":"-","I":"300","J":"300","K":"0"},"52":{"A":"2.0","B":"Parallelism error of measuring Jaws (All Value in mm)"},"53":{"B":"Parallelism of external measuring jaws","F":"0.012","G":"Parallelism of Internal measuring jaws","K":"0.011"},"54":{"A":"E","B":"E","M":"E"},"55":{"B":"E","F":"E","M":"E"},"56":{"B":"E","F":"E","M":"E"},"57":{"B":"E","F":"E","M":"E"},"58":{"B":"E","F":"E","M":"E"},"60":{"A":"General Remarks"},"61":{"A":"● The reading has been rounded off wherever applicable ● Calibration is performed without doing any adjustment in its original condition at time of receipt\/calibration, unless mentioned herein ● The calibration results relate only to the item calibrated and result reported in the certificate are valid at the time of and under the stated conditions of measurement. ● The Calibration certificate shall not be reproduced except in full, without written permission of the Laboratory ● *Recommended Next Due Date is reported as per requisition of customer"},"63":{"A":"-- End of Certificate --"}}},{"name":"Uncertainty","hidden":false,"max_col":"Z","rows":{"1":{"C":"Testing Electrical Standards Laboratory and R&D Institute Pvt. Ltd."},"2":{"C":"Calculation of Uncertainty of Measurement"},"3":{"C":"Issue No","F":"01","I":"Issue Date","L":"43831"},"4":{"C":"Amend No","F":"00","I":"Amend Date","L":"-"},"7":{"A":"1.0","B":"Scope"},"8":{"B":"Measurement of Uncertainty Calculation for calibrating the Caliper (Electronic \/ Dial \/ Vernier)","Z":"5"},"10":{"A":"2.0","B":"Date of Measurement Uncertainty Calculation:","H":"30\/08\/2025"},"11":{"O":"0 to 300 mm","P":"0","Q":"#N\/A","R":"#VALUE!","S":"#VALUE!","T":"#VALUE!","U":"#VALUE!","V":"#VALUE!","W":"#VALUE!"},"12":{"A":"3.0","B":"Details of Device Under Calibration (DUC):"},"13":{"B":"Nomenclature","D":"Electronic Caliper","P":"µV","Q":"0.000001","U":"0.33","V":"1","W":"0.006","X":"3","Y":"0.000003"},"14":{"B":"Range \/ Value","D":"0 to 300 mm","G":"300","H":"Model No. \/ Make","J":"Mitutoyo","P":"mV","Q":"0.001","U":"3.3","V":"2","W":"0.005","X":"5","Y":"0.000005"},"15":{"B":"Resolution","D":"0.01","E":"mm","G":"2","H":"COP followed","J":"COP\/001-01","P":"V","Q":"1","U":"33","V":"3","W":"0.005","X":"50","Y":"0.00005"},"16":{"B":"Parameter to be","H":"Thermal Expansion Co-efficient","J":"11.5","K":"µm\/m-°C","U":"330","V":"4","W":"0.0055","X":"500","Y":"0.0005"},"17":{"B":"calibrated","U":"1020","V":"5","W":"0.0055","X":"1500","Y":"0.0015"},"18":{"A":"4.0","B":"Details of Master \/ Equipment Used for Calibration:"},"19":{"B":"Standard","E":"Range \/ Resolution","G":"Accuracy","I":"Uncertainty","K":"Traceability","O":"#VALUE!","P":"#VALUE!","Q":"1","R":"0.0001","S":"0.0000001"},"20":{"O":"#VALUE!","P":"#VALUE!","Q":"2","R":"0.001","S":"0.00000012"},"21":{"B":"Caliper Checker, Make :Aditya, Sr. No.: 1019, Lab ID : CEQ025","E":"600 mm","G":"4.1","H":"µm","I":"4.6","J":"µm","K":"NABL Lab Certi No. :CC-2188, Cal. Certificate No: 2022\/01\/006, Calibration Date :03-01-2022, (Valid up to Two Year )"},"25":{"O":"#VALUE!","P":"#VALUE!","Q":"3","R":"0.01","S":"0.00000015"},"26":{"O":"#VALUE!","P":"#VALUE!","Q":"4","R":"0.1","S":"0.000001"},"27":{"O":"#VALUE!","P":"#VALUE!","Q":"5","R":"0.329","S":"0.0000013"},"28":{"O":"#VALUE!","P":"#VALUE!","Q":"6","R":"1","S":"0.0000029"},"29":{"A":"5.0","B":"Environmental Condition during Calibration:","O":"#VALUE!","P":"#VALUE!","Q":"7","R":"3.29","S":"0.000009"},"30":{"B":"Parameter","E":"Starting of Calibration","H":"Ending of Calibration","K":"Average","O":"#VALUE!","P":"#VALUE!","Q":"8","R":"10","S":"0.000039"},"31":{"B":"Temperature in °C","E":"0","H":"0","K":"0","O":"#VALUE!","P":"#VALUE!","Q":"9","R":"32.9","S":"0.000096"},"32":{"B":"Relative Humidity in %Rh","E":"0","H":"0","K":"0","O":"#VALUE!","P":"#VALUE!","Q":"10","R":"50","S":"0.0006"},"33":{"O":"#VALUE!","P":"#VALUE!","Q":"11","R":"329","S":"0.0025"},"34":{"A":"6.0","B":"Type A Uncertainty :","O":"#REF!","P":"#REF!","Q":"13","R":"900","S":"0.0032"},"35":{"A":"6.1","B":"Data for calculation of Standard Deviation","O":"#REF!","P":"#REF!","Q":"14","R":"1020","S":"0.0029"},"36":{"B":"Readings Taken at","E":"200","F":"Number of Reading (n)","H":"10"},"37":{"B":"Unit of Measurement is","E":"mm"},"38":{"B":"Sr. No.","C":"Reading","D":"Mean","E":"(Xn - Xm)","F":"(Xn - Xm)²","G":"Standard"},"39":{"C":"(Xn)","D":"(Xm)","G":"Deviation","K":"10"},"40":{"A":"1","B":"1","C":"150","D":"150.001","E":"-0.001","F":"0.000001","K":"150","Q":"-2","R":"0.01","S":"-0.02","T":"0 to 300 mm","U":"#VALUE!"},"41":{"A":"2","B":"2","C":"150","D":"150.001","E":"-0.001","F":"0.000001","G":"√ (Xn-Xm)²","K":"150","Q":"0","R":"0.01","S":"0","T":"0 to 300 mm","U":"#VALUE!"},"42":{"A":"3","B":"3","C":"150","D":"150.001","E":"-0.001","F":"0.000001","G":"n-1","K":"150","Q":"-1","R":"0.01","S":"-0.01","T":"0 to 300 mm","U":"#VALUE!"},"43":{"A":"4","B":"4","C":"150","D":"150.001","E":"-0.001","F":"0.000001","K":"150","Q":"-2","R":"0.01","S":"-0.02","T":"0 to 300 mm","U":"#VALUE!"},"44":{"A":"5","B":"5","C":"150","D":"150.001","E":"-0.001","F":"0.000001","K":"150","Q":"-1","R":"0.01","S":"-0.01","T":"0 to 300 mm","U":"#VALUE!"},"45":{"A":"6","B":"6","C":"150","D":"150.001","E":"-0.001","F":"0.000001","G":"0.0031622777","H":"mm","K":"150","Q":"-2","R":"0.01","S":"-0.02","T":"0 to 300 mm","U":"#VALUE!"},"46":{"A":"7","B":"7","C":"150","D":"150.001","E":"-0.001","F":"0.000001","G":"3.1622776602","H":"µm","K":"150","Q":"1","R":"0.01","S":"0.01","T":"0 to 300 mm","U":"#VALUE!"},"47":{"A":"8","B":"8","C":"150","D":"150.001","E":"-0.001","F":"0.000001","H":"0.001","K":"150","Q":"1","R":"0.01","S":"0.01","T":"0 to 300 mm","U":"#VALUE!"},"48":{"A":"9","B":"9","C":"150","D":"150.001","E":"-0.001","F":"0.000001","K":"150","Q":"-1","R":"0.01","S":"-0.01","T":"0 to 300 mm","U":"#VALUE!"},"49":{"A":"10","B":"10","C":"150.01","D":"150.001","E":"0.009","F":"0.000081","K":"150.01","Q":"0","R":"0.01","S":"0","T":"0 to 300 mm","U":"#VALUE!"},"50":{"K":"0.0031622777"},"51":{"A":"6.2","B":"Standard Deviation of mean (UA)","F":"Std. Dev \/ √n","G":"1","H":"µm"},"53":{"A":"6.3","B":"Degree of Freedom for Type A","F":"n-1","G":"9"},"60":{"A":"7.0","B":"Type B Uncertainty :"},"61":{"C":"Source of Uncertainty","G":"Distribution","H":"Degree of Freedom","I":"Calculation","L":"Value"},"63":{"B":"UB1 :","C":"Uncertainty reported in the calibration certificate","G":"Normal","H":"∞","I":"Calul. =","J":"4.6","K":"\/2"},"64":{"C":"Calibration Certificate of Caliper Checker","J":"2.3","K":"µm","L":"2.3","M":"µm"},"65":{"G":"(Value \/k)"},"66":{"C":"Value","D":"4.6","E":"µm"},"67":{"B":"UB2 :","C":"Max. Error reported in certi of Caliper Checker","G":"Rectangular","H":"∞","I":"Calculation","J":"2.05","K":"\/√3"},"68":{"C":"( Half of the error is to be considered )","J":"1.18","K":"µm","L":"1.18","M":"µm"},"69":{"G":"(Value\/√3)"},"70":{"C":"Value","D":"2.05","E":"µm"},"71":{"B":"UB3 :","C":"Uncertainty due to resolution of DUC","G":"Rectangular","H":"∞","I":"Calul. =","J":"5","K":"\/√3"},"72":{"C":"Take 50% of Resolution 0.01 mm","J":"2.89","K":"µm","L":"2.89","M":"µm"},"73":{"G":"(Value\/√3)"},"74":{"C":"Value","D":"5","E":"µm"},"75":{"B":"UB4 :","C":"Uncertainty due to Deviation from Ref. Temperature","G":"Rectangular","H":"∞","I":"Calul. =","J":"2","K":"\/√3"},"76":{"C":"( Temperature : 20°C ± 2°C)","J":"1.15","K":"°C","L":"0","M":"µm"},"77":{"G":"(Value\/√3)","I":"Sen. Co-eff","J":"0","K":"µm\/°C"},"78":{"C":"Value","D":"2","E":"°C","I":"= (0.3 m x (11.5 - 11.5 ) µm\/m-°C)"},"79":{"B":"UB5 :","C":"Uncerertainty due to error & uncertainty of","G":"Rectangular","H":"∞","I":"Calul. =","J":"0.3376758801","K":"\/√3 °C"},"80":{"C":"Temperature monitoring device (CEQ040)","J":"0.19","K":"°C","L":"0.66","M":"µm"},"81":{"C":"(Max. Error : 0.3°C & Uncertianty: 0.155°C)","G":"(Value\/√3)","I":"Sen. Co-eff","J":"3.45","K":"µm\/°C"},"82":{"C":"Value","D":"0.3376758801","E":"°C","I":"= (0.3 m x ( (11.5 + 11.5 )\/2) µm\/m-°C)"},"83":{"B":"UB6 :","C":"Uncertainty due to difference in temp. between","G":"Rectangular","H":"∞","I":"Calul. =","J":"0.4","K":"\/√3 °C"},"84":{"C":"DUC & master after stabilization","J":"0.23","K":"°C","L":"0.79","M":"µm"},"85":{"C":"( 20% of Deviation (±2°C) from Ref. Temp.)","G":"(Value\/√3)","I":"Sen. Co-eff","J":"3.45","K":"µm\/°C"},"86":{"C":"Value","D":"0.4","E":"°C","I":"= (0.3 m x ( (11.5 + 11.5 )\/2) µm\/m-°C)"},"87":{"B":"UB7 :","C":"Uncertainty due to thermal expansion","G":"Rectangular","H":"∞","I":"Calul. =","J":"1.15","K":"\/√3 °C"},"88":{"C":"co-efficient of DUC","J":"0.66","K":"µm\/m-°C","L":"0.4","M":"µm"},"89":{"C":"( 10% of 11.5 µm\/m-°C)","G":"(Value\/√3)","I":"Sen. Co-eff","J":"0.6","K":"m-°C"},"90":{"C":"Value","D":"1.15","E":"µm\/m-°C","I":"= ( 0.3 m x 2°C )"},"91":{"B":"UB8 :","C":"Uncertainty due to thermal expansion","G":"Rectangular","H":"∞","I":"Calul. =","J":"1.15","K":"\/√3 °C"},"92":{"C":"co-efficient of Master","J":"0.66","K":"µm\/m-°C","L":"0.4","M":"µm"},"93":{"C":"( 10% of 11.5 µm\/m-°C)","G":"(Value\/√3)","I":"Sen. Co-eff","J":"0.6","K":"m-°C"},"94":{"C":"Value","D":"1.15","E":"µm\/m-°C","I":"= ( 0.3 m x 2°C )"},"110":{"A":"8.0","B":"Uncertainty of Budget :"},"111":{"A":"Source of Uncertainty","B":"Estimate (xi)","D":"Limits (±)","F":"Probability Distribution Type A or B","G":"Standard Uncertainty U (Xi)","I":"Sensitivity Co-efficient Ci","K":"Uncertainty Contribution Ui (y)","M":"Degree of Freedom"},"114":{"A":"UB1","B":"300","C":"mm","D":"4.6","E":"µm","F":"Normal","G":"2.3","H":"µm","I":"1","K":"2.3","L":"µm","M":"∞"},"115":{"F":"Type B"},"116":{"A":"UB2","B":"300","C":"mm","D":"2.05","E":"µm","F":"Rectangular","G":"1.18","H":"µm","I":"1","K":"1.18","L":"µm","M":"∞"},"117":{"F":"Type B"},"118":{"A":"UB3","B":"300","C":"mm","D":"5","E":"µm","F":"Rectangular","G":"2.89","H":"µm","I":"1","K":"2.89","L":"µm","M":"∞"},"119":{"F":"Type B"},"120":{"A":"UB4","B":"20","C":"°C","D":"2","E":"°C","F":"Rectangular","G":"1.15","H":"°C","I":"0","J":"µm\/°C","K":"0","L":"µm","M":"∞"},"121":{"F":"Type B"},"122":{"A":"UB5","B":"20","C":"°C","D":"0.3376758801","E":"°C","F":"Rectangular","G":"0.19","H":"°C","I":"3.45","J":"µm\/°C","K":"0.6555","L":"µm","M":"∞"},"123":{"F":"Type B"},"124":{"A":"UB6","B":"20","C":"°C","D":"0.4","E":"°C","F":"Rectangular","G":"0.23","H":"°C","I":"3.45","J":"µm\/°C","K":"0.7935","L":"µm","M":"∞"},"125":{"F":"Type B"},"126":{"A":"UB7","B":"11.5","C":"µm\/m-°C","D":"1.15","E":"µm\/m-°C","F":"Rectangular","G":"0.66","H":"µm\/m-°C","I":"0.6","J":"m-°C","K":"0.396","L":"µm","M":"∞"},"127":{"F":"Type B"},"128":{"A":"UB8","B":"11.5","C":"µm\/m-°C","D":"1.15","E":"µm\/m-°C","F":"Rectangular","G":"0.66","H":"µm\/m-°C","I":"0.6","J":"m-°C","K":"0.396","L":"µm","M":"∞"},"129":{"F":"Type B"},"130":{"A":"UA","B":"300","C":"mm","D":"3.1622776602","E":"µm","F":"Normal","G":"1","H":"µm","I":"1","K":"1","L":"µm","M":"9"},"131":{"F":"Type A"},"133":{"A":"9.0","B":"Combined Standard Uncertainty (Uc) :","G":"±","H":"4.17","I":"µm"},"135":{"A":"10.0","B":"Effective Degree of Freedom (Calculated Value) neff :","G":"2721","I":"","J":"∞","L":""},"136":{"B":"(Uc4) \/ [ (UA4) \/ n-1 ]","L":"1","M":"2721"},"137":{"L":"2","M":"∞"},"138":{"A":"11.0","B":"Coverage factor (k) :","H":"2","I":"at 95.45% Confidence level","L":"2","M":"∞"},"139":{"L":"k ="},"140":{"A":"12.0","B":"Expanded Uncertainty ( Uc x k ) :","G":"±","H":"8.3","I":"µm"},"141":{"H":"10","I":"µm","J":"as per Accreditation Scope","M":"10"},"142":{"A":"13.0","B":"Reporting the Result :","E":"300 mm ± 10.0 µm"},"143":{"E":"at a confidence level of 95.45%, Coverage factor k =2 & Degree of freedom neff = ∞"},"146":{"H":"10"},"162":{"A":"1","B":"Details of Masters"},"163":{"A":"1","B":"2","C":"3","D":"4","E":"5","F":"6","G":"7","H":"8","I":"9","J":"10","K":"11","L":"12","M":"13","N":"14"},"164":{"A":"1","B":"Caliper Checker","C":"Aditya","D":"1019","E":"600 mm","F":"CEQ025","G":"CC-2188","H":"2022\/01\/006","I":"03-01-2022","J":"Two Year","K":"4.1","L":"4.6","M":"11.5"},"165":{"A":"2","B":"Length bar set","C":"Mikronix","D":"4903","E":"25 to 300 mm ( 12 pcs)","F":"CEQ038","G":"CC-2188","H":"2022\/01\/010","I":"04-01-2022","J":"Two Year","K":"#N\/A","L":"#N\/A","M":"11.5"},"166":{"A":"3"},"167":{"A":"4"},"169":{"A":"1","B":"Caliper Checker","C":"Aditya","D":"1019","E":"600 mm","F":"CEQ025","G":"CC-2188","H":"2022\/01\/006","I":"03-01-2022","J":"Two Year","K":"4.1","L":"4.6","M":"11.5","N":"0"},"171":{"B":"Range","C":"300","D":"1"},"172":{"F":"4.1","H":"300"},"173":{"B":"1","C":"mm","D":"1","F":"4.6"},"174":{"B":"2","C":"µm","D":"0.001"},"175":{"B":"3","C":"m","D":"1000"},"177":{"C":"mm","D":"1","E":"0.01","F":"1000","G":"10"},"179":{"G":"Acc","H":"Uncer"},"180":{"C":"0.3","D":"11.5","E":"11.5","G":"0.3","H":"0.155"},"183":{"A":"300","B":"300","C":"1.35","D":"0.9","E":"0"},"184":{"B":"275","C":"1","D":"0.9","E":"0"},"185":{"B":"250","C":"1.01","D":"0.9","E":"0"},"186":{"B":"225","C":"1","D":"0.9","E":"0"},"187":{"B":"200","C":"1","D":"0.9","E":"0"},"188":{"B":"175","C":"1","D":"0.9","E":"0"},"189":{"B":"150","C":"1","D":"0.9","E":"0"},"190":{"B":"125","C":"1","D":"0.9","E":"0"},"191":{"B":"100","C":"1","D":"0.9","E":"0"},"192":{"B":"75","C":"1","D":"0.9","E":"0"},"193":{"B":"50","C":"1","D":"0.9","E":"0"},"194":{"B":"25","C":"1","D":"0.9","E":"0"},"195":{"F":"0","G":"#N\/A","H":"#N\/A"},"196":{"G":"#N\/A","H":"#N\/A"}}},{"name":"Software","hidden":false,"max_col":"D","rows":{"1":{"A":"Receipt No","B":"LM250830\/1"},"2":{"A":"Job No","B":"LM250830\/1 \/ TC \/ MT \/ 002"},"3":{"A":"URL No","B":"CC234525000000154F"},"4":{"A":"Issue Date","B":"30\/08\/2025"},"5":{"A":"Customer Name","B":"AccuTest Calibration"},"6":{"A":"Customer Address","B":"12 Calibration Road, Tech Park, Surat, Gujarat, India, 390011"},"7":{"A":"Receipt Type","B":"Lab"},"8":{"A":"Gatepass No","B":"LTB-300825\/001"},"9":{"A":"Gatepass Date","B":"30\/08\/2025"},"10":{"A":"Receipt Date","B":"30\/08\/2025"},"11":{"A":"Calibration Date","B":"30\/08\/2025"},"13":{"A":"Due Date","B":"46421"},"14":{"A":"Description","B":"description"},"15":{"A":"Make","B":"34"},"16":{"A":"Model","B":"88","C":"Make \/ Model","D":"34 \/ 88"},"17":{"A":"Sr No","B":"2"},"18":{"A":"ID No","B":"2"},"19":{"A":"Location","B":"location"},"20":{"A":"Type","B":"type"}}}]}